Tronxy X5SA 24V CoreXY 3D Printer DIY Kit with Build Size 330x330x400mm
$249.99
Ship from local warehouses see all
Delivery if you order today by 17:30.
Tronxy X5SA DIY 3D Printer New Upgrade Silent Mother Board Large Printing Size 330x330x400mm
About this DIY Economical FDM 3d printer:
【Metal Flange Bearings】Chromium Steel shell and bearing ball, good abrasion resistance, Smooth moving, high rigidity and long working life.【DIY Assembly】 Diy fdm 3d printer, you can enjoy the fun of assembly, An excellent printer for experienced users.
read more
Frequently Bought Together
Product Details

CoreXY Structure

Resume after Power Interrupt
3D printers often suffer from printing interruption due to various reasons, so TRONXY X5SA has introduced the power-off resuming printing function to prevent the waste of consumables caused by power-off.

Broken Material Detection
"Broken Material Detection" can activate the alarm device when the material is about to run out or break the material, automatically suspend the current printing task, and at the same time, remind the user to replenish the material in time.

Automatic Leveling
Built-in high-quality chip, responsive, provides short-circuit protection, can also prevent electromagnetic interference around the machine to protect the print quality.

Display Screen
The X5SA printer’s display screen is a 3.5-inch full-color touch screen with a humanized interface, which makes the operation easier.

Print Head Fan
The print head fan relieves the internal heat and blows the external wind in to prevent the machine from overheating and causing the machine to crash.

30pin Cable
X5SA printer adopts single-row cable design, bid farewell to complicated wires, 30P single-row cable can be plugged in, saving worry and effort, and improving installation efficiency.

Power Supply
The voltage of the power supply is adjusted to 110V in the US by default. Please do not switch the voltage to 220V at will, which may cause the fuse to explode.
Print Accuracy 0.1-0.4mm
Print Principle FDM (Fused Deposition Molding)
Nozzle Size 0.4mm
Nozzle Quanity 1
Print Speed 20-150mm/s (Advise 60mm/s)
Position Accuracy X/Y - 0.00625mm, Z - 0.00125mm
Filaments Support PLA, TPU, ABS, Wood, PC, HIPS, Wooden filament etc.
Print Environment 8-40℃
Nozzle Temp 275℃ (MAX)
X5SA / X5SA Pro / X5SA 2E
* OSG Guides: Exclusive OSG dual core guide rail more stable and high precision extended service life.
Brand new upgraded TR Auto Leveling Sensor Lattice glass printing platform
- Core XY structure design, full belt drive, higher stability and printing accuracy, ensure the quality of the model; Dual Z-axis design, increase the bearing capacity of the hot bed, reduce errors in printing, and print more finely.
- X5SA DIY assembly, providing complete parts and tools. The paper manual, SD card with an electronic version of the instructions and a link to the installation video. Assemble and debug by yourself, enjoy the fun of DIY assembly, possible to achieve unlimited innovation and transformation of appearance and performance, so as to meet your ideas and creativity. This process takes some time to install, debug and learn, which is quite challenging for novices, more recommended for experienced user.
- Silent motherboard and high quality power supply. TRONXY silent motherboard adopts German imported TMC ultra-quiet motor drive chip,allowing the printer always running at low decibels. 360W high-quality power supply, the power supply system is more stable and safe.
- Full functions, support Automatic leveling, Manual leveling, Filament detector, Power failure resume to print functions and other basic functions.

New Upgrade Silent Mother Board
- The TRONXY X5SA 3D printer has an upgraded silent motherboard and uses the TMC2225 driver chip to provide you with a quiet printing environment.
- And X5SA silent motherboard has a 30pin horn socket wiring design, which combines 30 cables to make the printer more concise and easy to operate.
Big Volume Build of 330x330x400mm
COREXY 3d printer structure It uses XY motors to work together. Since the timing belt moves on a flat surface, printing is more stable.- High molding accuracy.
- The machine is very stable even under high-speed operation.
- The motherboard and power supply can be hidden, and the space utilization is large.


Ultra Silent Motherboard
TRONXY Silent motherboard has a built-in active noise reduction function, which modulates the voltage carrier to minimize the current wave, cancel out the noise, and make the noise reduction effect more obvious. Support WIFI expansion, with WIFI interface.
CoreXY Structure
- CoreXY means that the motor is fixed. The printer can speed up quickly.
- Two stepping motors are installed on the carriage moving in the X and Y directions to make the movement of the carriage more precise and stable.

Resume after Power Interrupt
3D printers often suffer from printing interruption due to various reasons, so TRONXY X5SA has introduced the power-off resuming printing function to prevent the waste of consumables caused by power-off.

Broken Material Detection
"Broken Material Detection" can activate the alarm device when the material is about to run out or break the material, automatically suspend the current printing task, and at the same time, remind the user to replenish the material in time.

Automatic Leveling
Built-in high-quality chip, responsive, provides short-circuit protection, can also prevent electromagnetic interference around the machine to protect the print quality.

Display Screen
The X5SA printer’s display screen is a 3.5-inch full-color touch screen with a humanized interface, which makes the operation easier.

Print Head Fan
The print head fan relieves the internal heat and blows the external wind in to prevent the machine from overheating and causing the machine to crash.

30pin Cable
X5SA printer adopts single-row cable design, bid farewell to complicated wires, 30P single-row cable can be plugged in, saving worry and effort, and improving installation efficiency.

Power Supply
The voltage of the power supply is adjusted to 110V in the US by default. Please do not switch the voltage to 220V at will, which may cause the fuse to explode.
Specification:
Print Size 330*330*400mmPrint Accuracy 0.1-0.4mm
Print Principle FDM (Fused Deposition Molding)
Nozzle Size 0.4mm
Nozzle Quanity 1
Print Speed 20-150mm/s (Advise 60mm/s)
Position Accuracy X/Y - 0.00625mm, Z - 0.00125mm
Filaments Support PLA, TPU, ABS, Wood, PC, HIPS, Wooden filament etc.
Print Environment 8-40℃
Nozzle Temp 275℃ (MAX)


Watch More
Closed Loop Timing Belt Installation for X5SA Series.
How to Install High Temp Print Head and Update the Firmware?
Belt Mounting for Tronxy X5SA Series.
How to Replace the MK10 Heated Kit for X5SA Series?
User Manual Documentation
https://drive.google.com/file/d/18fswGeOGDbJ6qOZQCeucJaJJVaVypIGl/view?usp=drive_linkX5SA Series Compares
X5SA / X5SA Pro / X5SA 2E
X5SA / X5SA Pro / X5SA 2E
(scroll to view all)
X5SA Series | X5SA | X5SA Pro | X5SA 2E |
Photo |
![]() | ![]() Learn more > | ![]() Learn more > |
Printing Size | 330x330x400mm | 330x330x400mm | 330x330x400mm |
Printing Speed | 20-100 mm/s (Suggest 60 mm/s) | 20-100 mm/s (Suggest 60 mm/s) | 20-100 mm/s (Suggest 60 mm/s) |
Layer Thickness | 0.1-0.3 mm | 0.1-0.3 mm | 0.1-0.3 mm |
Nozzle Diameter | 0.4 mm | 0.4 mm | 0.4 mm |
Print Color | Single Color | Single Color | Dual Color (2-in-1-out) |
Positioning Acuracy | X/Y: S.00625 mm; Z: S0.00125 mm | X/Y: S.00625 mm; Z: S0.00125 mm | X/Y: S.00625 mm; Z: S0.00125 mm |
Power Supply | Input 110-220v; Output 24v 360W | Input 110-220v; Output 24v 360W | Input 110-220v; Output 24v 360W |
Connection | TF Card & USB | TF Card & USB | TF Card & USB |
Slice Software | Cura, Repetier-host, Tronxy Slice Software | Cura, Repetier-host, Tronxy Slice Software | Cura, Repetier-host, Tronxy Slice Software |
Filament Support | 1. 75mm, PLA / ABS / PETG / TPU / Flexible | 1. 75mm, PLA / ABS / PETG / TPU / Flexible | 1. 75mm, PLA / ABS / PETG / TPU / Flexible |
Auto Leveling | ✓ | ✓ | ✓ |
Resume Print After Power Failure | ✓ | ✓ | ✓ |
Filament Run-out Detection | ✓ | ✓ | DOUBLE |
Dual Axis Material | Alumunium Profile | OSG External Dual Axis Guide Rail | Alumunium Profile |
Titan Extruder | ✓ | ✓ | DOUBLE |

Tronxy X5SA 24V CoreXY 3D Printer DIY Kit with Build Size 330x330x400mm
$249.99
United States