Tronxy VEHO 800 2E / VEHO 100 2E Large Scale 3D Printer Multi Color Big Format Direct Drive 3D Printer Build Size 800x800x800mm 275 Degree Hotend
Coupon: $50 USD off code SP50OFF
Delivery
Tronxy VEHO 800 Large Direct Drive 3D Printer 800 x 800 x 800 mm 275 Degree Hotend
About this 800mm large 3d printer:
- Super large buiding size 800x800x800mm
- Large Fixed foot cup & Reinforce cross braces
- Auto-Leveling TR black sensor
- Direct drive 80cm 31 inch 3D Printer
- Open source freely modification
- Stable 30R Extrusion profile frame structure
- Eight languages Touch Screen & USB connection
Product Details
PRE-ORDER Custom 3D Printer Timeline:
How to install Tronxy new type VEHO-800 Diy Large Direct Drive 3D Printer Step by Step? Please check the installation guaide video.
8 Language System
3.5 Inch Touch Screen
TMC2209 Mute Drive Chip
Filament Run-out Detection
Real-time Z Axis Adjustment
Lock Screen Funtion
Auto Leveling Function
Resume Print After Power Failure
1. 320 Celsius High Temperature Head (Single Color)
2. Multicolor 2-in-1-out Head (Dual Color)
3. Laser Engraving Head
Plug in the power cord and power on.
Click "System".
Click "Install z-stop".
Click the icon in the red box.
Click "V icon to lower the hot bed to the lowest point.
The hot bed at the Z1 position reaches the lowest point.
Here, the dot will become a red dot.
8 Languages
Full colorful touch screen, easy operate, system has 8 different language, easy switching.
Multiple Connection
VEHO-800 supports TF card, USB and type-B three ways connection.
PEI Magnetic Sticker
After cultivation, the stems, veins, and unwanted particles are removed, leaving only the purest flesh of the leaves. The leaves are now called Tencha.
Auto Leveling
TR SENSOR is applicable to all non transparent platforms and 25 detection points to make leveling more accurate.
Filament Run-out Detection
When detected that the filament are exhausted or disconnected, an alarm sound would be given in time and stop printing.
Resume Print Function
When power failure during printing, the system would be save the printing process, later can continue the current prints.
VEHO 800 / 1000 Parameter
Advantages of VEHO 800:
- 1. 320 degree hotend can print a wider range of filaments, ie: PP, PC, filaments with metal components etc.
- 2. Metal OSG 15 rails XYZ axis and aluminum frame.
- 3. Imported mute drive chip TMC2209, motherboard STM32F4.
- 4. Direct extrusion head stable heat and fast extrusion filaments.
- 5. Dual Z axis limited Switches helps leveling more accuracy.
- 6. Filament detection and resume print functions available.
- 7. 8 languages system easy switching.
- 8. Mutiple connection support USB, TF card and Type-B sloct.
- 9. 3.5 inch colorful touch screen.
- 10. PEI platform printing is not warped and easy mold taking.
- 11. Large hand-tightening nut makes leveling process more convenient.
- 12. No operation lock screen, click to wake up easily.
- Verify that main board powers up and that the display is operating / displaying normal.
- Connect USB port to PC and verify communications between main board and PC. Note any discrepancies and correct.
- Manually stoke all axis movement (X,Y,Z). Verify all movement smooth and unrestricted. Note any discrepancies and correct. Look for any wobble or movement shift.
- Home all axis (X,Y,Z). Verify homing successful. Note any discrepancies and correct.
- Perform auto bed level operation. Verify accuracy of auto level operation. Note any discrepancies and correct. Bed uniformity should not be crooked or warped and bed uniformity should be within plus or minus .01mm.
- Preheat the bed to 100 deg C, then measure temp with digital thermometer to verify accuracy. Note any discrepancies and correct. Bed should reach the specified temp.
- Preheat Hot-end to maximum 320 degrees temp, then measure temp with digital thermometer to verify accuracy. Note any discrepancies and correct. Hot-end should reach the specified temp.
- Print a test print of 3D object. Verify speed, object appearance, no layer shift. Note discrepancies and correct. If the ball screws are bent, rails not straight, or machine not square this test would reveal those problems.
We assure all parts are of high quality and that all the electronics ie: mother board, power supply, stepper motors are fully tested and functional prior to shipping.
VEHO 800 3 Versions:
VEHO 800 Standard: Silicone Heating Bed + 8mm Glass Panel + Insulation Cotton
VEHO 800 PEI Version: PEI 800 Plate (800mmx800mm) + Magnetic Sticker
VEHO 800 PVC Version: PVC 800 Sticker
The 3 versions are 3 kinds of heated bed plate stickers, can choose from the model list, also can only purchase PEI or PVC if you only need them.
The 3 versions are 3 kinds of heated bed plate stickers, can choose from the model list, also can only purchase PEI or PVC if you only need them.
VEHO-800 (VEHO-800-2E) Package Details:
Package 1: 32.6kg / 114x31x27cm
Package 2: 41.5kg / 95x92x26cm
Gross Weight: 75KG
Standard Version:
Standard Version:
800 series and 1000 series standard versions do not include the metal PEI sheet.
PRE-ORDER Custom 3D Printer Timeline:
Custom 3d printer time is 40-45 days, sea shipping time is 30 days, and the total time is around 70 days you can get the 3d printer after being paid.
VEHO-800 Large Direct Drive 3D Printer 800x800x800 mm Installation Guide Video
How to install Tronxy new type VEHO-800 Diy Large Direct Drive 3D Printer Step by Step? Please check the installation guaide video.
8 Language System
3.5 Inch Touch Screen
TMC2209 Mute Drive Chip
Filament Run-out Detection
Real-time Z Axis Adjustment
Lock Screen Funtion
Auto Leveling Function
Resume Print After Power Failure
3 Options
1. 320 Celsius High Temperature Head (Single Color)
2. Multicolor 2-in-1-out Head (Dual Color)
3. Laser Engraving Head
Efficient Platform
800W 110v / 220v silicone heating pad, large sie lttice glass panel best heating transtfer with PEI magnetic sticker easy mold taking, three-layer efficient heatbed.
AlI VEHO series use OSG 15 high quality guide rail.
OSG 15 Guide Rail
- The cost is more expensive than the linear guide rail.
- The high-speed movement is smoother.
- High speed and low noise. when moving.
- Large slider platform is more stable.
OSG 15 Guide Rail
- The cost and quality are uneven.
- Moving the slider is easy to get stuck and assembling is easy to drop beads.
- Noise comparison when moving slider.
- Small slice plate is easy to shake.
New Z Axis Double Limit system for all VEHO series products.
Location distribution of connecting lines and sockets.
- 1. Y Axis Motor Line Socket
- 2. 30 Pin Ribbon Cable
- 3. Z1 Photoelectric Switcht
- 4. Z1 Motorline Socket
- 5. Hotbed Line, Power Line, BTEMP Line, AC Hotbed Line
- 6. Z2 Photoelectric Switch
- 7. Z2 Motor Line Socke
Installation and working principle of z-axis limit switch
Plug in the power cord and power on.
Click "System".
Click "Install z-stop".
Click the icon in the red box.
Click "V icon to lower the hot bed to the lowest point.
The hot bed at the Z1 position reaches the lowest point.
Here, the dot will become a red dot.
Direct Drive Extrusion
The filament is directly heated and fully melted, supporting a variety of consumables.
Double Overheat Protection
Temperature control system is equipped with temperature control fused and double heat protection to effectively prevent accident.
8 Languages
Full colorful touch screen, easy operate, system has 8 different language, easy switching.
Multiple Connection
VEHO-800 supports TF card, USB and type-B three ways connection.
PEI Magnetic Sticker
After cultivation, the stems, veins, and unwanted particles are removed, leaving only the purest flesh of the leaves. The leaves are now called Tencha.
Auto Leveling
TR SENSOR is applicable to all non transparent platforms and 25 detection points to make leveling more accurate.
Filament Run-out Detection
When detected that the filament are exhausted or disconnected, an alarm sound would be given in time and stop printing.
Resume Print Function
When power failure during printing, the system would be save the printing process, later can continue the current prints.
VEHO 800 / 1000 Parameter
VEHO 800 / 1000 Parameter
(scroll to view all)
| Model | VEHO 800 | VEHO 1000 | VEHO 1000-16 | VEHO 800 2E | VEHO 1000 2E | VEHO 1000-16 2E |
| Print Size (mm) | 800x800x800 | 1000x1000x1000 | 1000x1000x1600 | 800x800x800 | 1000x1000x1000 | 1000x1000x1600 |
| High Temperature Head | 320 Degree | 275 Degree | ||||
| Print Color | Single Color | Multicolor (2-in-1-out) | ||||
| Print Principle | FDM (Fused Depositioning Molding) | |||||
| Extrusion | Direct Drive | |||||
| Print Speed | 20- 150mm/s (advs 60mm/s) | |||||
| Nozzle Size (mm) | 0.6 | |||||
| Layer Thickness (mm) | 0.1-0.5 | |||||
| Heatbed Temperature | 100 Celsius | |||||
| Heatbed Material | 800W Silicone heating pad + Glass plate + PEI magnetic sticker | |||||
| Nozzle Temperature | 275 Celsius | |||||
| Positioning Accuracy | XY-0.0125mm, Z-0.0625mm | |||||
| Filament Support | PLA / ABS / PETG / PA / WOOD | |||||
| File Format | Input: .stl /.obj; Output: .gcode | |||||
| Connection | U Disk, TF Card, Type-B Socket | |||||
| Software | Cura, Repetier- Host, Simplify3D, Prusa | |||||
| Power Supply | AC 110/220V, DC 1100W | |||||
| Certificates | CE, FCC, Rohs | |||||
VEHO Series Parameter
VEHO 500 / 600 / 800 Parameter
VEHO 500 / 600 / 800 Parameter
VEHO 500 / 600 / 800 Parameter
(scroll to view all)
| Model | VEHO 500 | VEHO 600 | VEHO 800 | VEHO 500 2E | VEHO 600 2E | VEHO 800 2E |
| Print Size (mm) | 500x500x500 | 600x600x600 Learn more > | 800x800x800 Learn more > | 500x500x500 | 600x600x600 Learn more > | 800x800x800 Learn more > |
| Print Color | Single Color | Multicolor (2-in-1-out) | ||||
| Print Principle | FDM (Fused Depositioning Molding) | |||||
| Extrusion | Direct Drive | |||||
| Print Speed | 20- 150mm/s (advs 60mm/s) | |||||
| Nozzle Size (mm) | 0.6 | |||||
| Layer Thickness (mm) | 0.1-0.5 | |||||
| Heatbed Temperature | 100 Celsius | |||||
| Heatbed Material | 800W Silicone heating pad + Glass plate + PEI magnetic sticker | |||||
| Nozzle Temperature | 275 Celsius | |||||
| Positioning Accuracy | XY-0.0125mm, Z-0.0625mm | |||||
| Filament Support | PLA / ABS / PETG / PA / WOOD | |||||
| File Format | Input: .stl /.obj; Output: .gcode | |||||
| Connection | U Disk, TF Card, Type-B Socket | |||||
| Software | Cura, Repetier- Host, Simplify3D, Prusa | |||||
| Power Supply | AC 110/220V, DC 1100W | |||||
| Certificates | CE, FCC, Rohs | |||||
VEHO Custom Printing Size
Custom Machine Printing Size Sheet
For more size customization, please contact us info@tronxy3dprinter.com
Custom Machine Printing Size Sheet
Custom Machine Printing Size Sheet
(scroll to view all)
| Model | Printing Size (mm) | Model | Printing Size (mm) |
| Single Color | Multicolor (2-in-1-out) | ||
| VEHO 500 | 500x500x500 | VEHO 500 2E | 500x500x500 |
| VEHO 500-8 | 500x500x800 | VEHO 500-8 2E | 500x500x800 |
| VEHO 500-10 | 500x500x1000 | VEHO 500-10 2E | 500x500x1000 |
| VEHO 600 Learn more > | 600x600x600 | VEHO 600 2E Learn more > | 600x600x600 |
| VEHO 600-8 | 600x600x800 | VEHO 600-8 2E | 600x600x800 |
| VEHO 600-10 | 600x600x1000 | VEHO 600-10 2E | 600x600x1000 |
| VEHO 800 Learn more > | 800x800x800 | VEHO 800 2E Learn more > | 800x800x800 |
| VEHO 800-10 | 800x800x1000 | VEHO 800-10 2E | 800x800x1000 |
| VEHO 800-12 | 800x800x1200 | VEHO 800-12 2E | 800x800x1200 |
| VEHO 1000 | 1000x1000x1000 | VEHO 1000 2E | 1000x1000x1000 |
| VEHO 1000-12 | 1000x1000x12000 | VEHO 1000-12 2E | 1000x1000x12000 |
| VEHO 1000-16 | 1000x1000x1600 | VEHO 1000-16 2E | 1000x1000x1600 |
3D Printer Compares
Moore 1 / Moore 2 / Moore 2 Pro / Moore 3 / Moore 3 Pro
* OSG Guides: Exclusive OSG dual core guide rail more stable and high precision extended service life.
X5SA / X5SA Pro / X5SA 2E
X5SA 400 / X5SA 400 Pro / X5SA 400 2E
X5SA 500 Pro / X5SA 500 2E
Moore 1 / Moore 2 / Moore 2 Pro / Moore 3 / Moore 3 Pro
Moore 1 / Moore 2 / Moore 2 Pro / Moore 3 / Moore 3 Pro
(scroll to view all):
| Moore Series 3D Printers | Moore 1 | Moore 2 | Moore 2 Pro | Moore 3 | Moore 3 Pro |
| Photo |  Learn more > |  Learn more > |  Learn more > |  Learn more > |  Learn more > |
| Build Size | 180x180x180mm | 255x255x260mm | 255x255x260mm | 330x330x370mm | 330x330x370mm |
| OSG Guides * | X | ✓ | ✓ | ✓ | ✓ |
X5SA / X5SA Pro / X5SA 2E
X5SA / X5SA Pro / X5SA 2E
(scroll to view all)
| X5SA Series | X5SA | X5SA Pro | X5SA 2E |
| Photo |  Learn more > |  Learn more > |  Learn more > |
| Printing Size | 330x330x400mm | 330x330x400mm | 330x330x400mm |
| Print Color | Single Color | Single Color | Dual Color (2-in-1-out) | Filament Run-out Detection | ✓ | ✓ | DOUBLE |
| Dual Axis Material | Alumunium Profile | OSG External Dual Axis Guide Rail | Alumunium Profile |
| Titan Extruder | ✓ | ✓ | DOUBLE |
X5SA 400 / X5SA 400 Pro / X5SA 400 2E
X5SA 400 / X5SA 400 Pro / X5SA 400 2E
(scroll to view all)
| X5SA 400 Series | X5SA 400 | X5SA 400 Pro | X5SA 400 2E |
| Photo |  Learn more > |  Learn more > |  Learn more > |
| Printing Size | 400x400x400mm | 400x400x400mm | 400x400x400mm |
| Print Color | Single Color | Single Color | Dual Color (2-in-1-out) | Filament Run-out Detection | ✓ | ✓ | DOUBLE |
| Dual Axis Material | Alumunium Profile | OSG External Dual Axis Guide Rail | Alumunium Profile |
| Titan Extruder | ✓ | ✓ | DOUBLE |
X5SA 500 Pro / X5SA 500 2E
X5SA 500 Pro / X5SA 500 2E
(scroll to view all)
| X5SA 500 Series | X5SA 500 Pro | X5SA 500 2E |
| Photo |  Learn more > |  Learn more > |
| Printing Size | 500x500x600mm | 500x500x600mm |
| Print Color | Single Color | Dual Color (2-in-1-out) | Filament Run-out Detection | ✓ | DOUBLE |
| Dual Axis Material | OSG External Dual Axis Guide Rail | Alumunium Profile |
| Titan Extruder | ✓ | DOUBLE |
Tronxy VEHO 800 2E / VEHO 100 2E Large Scale 3D Printer Multi Color Big Format Direct Drive 3D Printer Build Size 800x800x800mm 275 Degree Hotend
VEHO 800 2E