Tronxy PVA Filament Excellent Water Solubility Support 3D Printer Filament 1.75mm 0.5KG Spool for 3D Printers Clear Near Nature Tronxy 3D Printer | Tronxy Large 3D Printer | Tronxy Large Format Veho 600 800 1000 3D Printer
Tronxy PVA Filament Excellent Water Solubility Support 3D Printer Filament 1.75mm 0.5KG Spool for 3D Printers Clear Near Nature Tronxy 3D Printer | Tronxy Large 3D Printer | Tronxy Large Format Veho 600 800 1000 3D Printer
Tronxy PVA Filament Excellent Water Solubility Support 3D Printer Filament 1.75mm 0.5KG Spool for 3D Printers Clear Near Nature Tronxy 3D Printer | Tronxy Large 3D Printer | Tronxy Large Format Veho 600 800 1000 3D Printer
Tronxy PVA Filament Excellent Water Solubility Support 3D Printer Filament 1.75mm 0.5KG Spool for 3D Printers Clear Near Nature Tronxy 3D Printer | Tronxy Large 3D Printer | Tronxy Large Format Veho 600 800 1000 3D Printer
Tronxy PVA Filament Excellent Water Solubility Support 3D Printer Filament 1.75mm 0.5KG Spool for 3D Printers Clear Near Nature Tronxy 3D Printer | Tronxy Large 3D Printer | Tronxy Large Format Veho 600 800 1000 3D Printer
Tronxy PVA Filament Excellent Water Solubility Support 3D Printer Filament 1.75mm 0.5KG Spool for 3D Printers Clear Near Nature Tronxy 3D Printer | Tronxy Large 3D Printer | Tronxy Large Format Veho 600 800 1000 3D Printer
Tronxy PVA Filament Excellent Water Solubility Support 3D Printer Filament 1.75mm 0.5KG Spool for 3D Printers Clear Near Nature Tronxy 3D Printer | Tronxy Large 3D Printer | Tronxy Large Format Veho 600 800 1000 3D Printer

Tronxy PVA Filament Excellent Water Solubility Support 3D Printer Filament 1.75mm 0.5KG Spool for 3D Printers Clear Near Nature

$39.99
Estimated Delivery by

PVA Filament-Water Soluble Support 3D Printer Filament

About this Clear Near Nature PVA Filament:

【Attention Please】This filament is optimized PVA, which avoids the problems of easy breakage, severe moisture, and difficult storage caused by PVA being too soluble in water. Therefore, this PVA filament is insoluble in water at room temperature, but it will soften at a water temperature of 55-60°C to achieve the purpose of easily removing the support. If you want PVA filament that is completely soluble in water, please do not buy this product. If your main purpose is to remove the support more easily and you don't care whether the PVA completely melts in the water, then this PVA is a better choice.
【Water Soluble PVA】Water-soluble Polymer. Not completely dissolved, but softening and layering,then peel off with your hands. It will not Damage Printed Surface. Good Bonding to Various Material Such as PLA. Environmental-friendly and Non-toxic. Ideal for Complex Prints!
read more

Frequently Bought Together

Total price:$856.97
Details
Water-soluble PVA filament needed to 3D print complex models and water-soluble support is easier to remove than regular support filament. If you have a printer with two extruders, you can load one extruder with PLA for printing models and another with PVA for printing support structures.
Tronxy PVA Filament Excellent Water Solubility Support 3D Printer Filament 1.75mm 0.5KG Spool for 3D Printers Clear Near Nature Tronxy 3D Printer | Tronxy Large 3D Printer | Tronxy Large Format Veho 600 800 1000 3D Printer
You need PVA to print difficult overhangs and bridges in your model. After printing, the model is immersed in 55-65℃ warm water for softening, and after layering, the PVA support structure is peeled off by hand and washed off. It reduces the risk of model damage and makes post-processing easier.

Tronxy PVA Filament Excellent Water Solubility Support 3D Printer Filament 1.75mm 0.5KG Spool for 3D Printers Clear Near Nature Tronxy 3D Printer | Tronxy Large 3D Printer | Tronxy Large Format Veho 600 800 1000 3D Printer

Instructions for use
Ideal for Supporting Complex Structural Models

  • 1. The recommended printing temperature is 200°C; Bed temperature: 60°C; Due to the characteristics of the filament itself, if the setting temperature exceeds the recommended range of 200°C, it is easy to cause plugging.
  • 2. Fan speed: 100%; Print speed: 20–40mm/s (recommended 30mm/s).
  • 3. It is recommended to use about 55°C - 65°C warm water to loosen the PVA supports faster. The higher the temperature, the faster the PVA dissolves and falls.
  • Good choice for support filament
    Not Dissolved in water, But softened and layered.

  • 1. Thanks to its softening in water, it makes possible to print complex models and mobile constructions that no longer need to be assembled from individual parts.
  • 2. After the PVA layeres and softens, it is very easy to peel off the model by hand.

  • Tronxy PVA Filament Excellent Water Solubility Support 3D Printer Filament 1.75mm 0.5KG Spool for 3D Printers Clear Near Nature Tronxy 3D Printer | Tronxy Large 3D Printer | Tronxy Large Format Veho 600 800 1000 3D Printer

    Tronxy PVA Filament Excellent Water Solubility Support 3D Printer Filament 1.75mm 0.5KG Spool for 3D Printers Clear Near Nature Tronxy 3D Printer | Tronxy Large 3D Printer | Tronxy Large Format Veho 600 800 1000 3D Printer

    Remove the support more easily
    Attention Please

  • This filament is optimized PVA, which avoids the problems of easy breakage, severe moisture, and difficult storage caused by PVA being too soluble in water.
  • Therefore, this PVA filament is insoluble in water at room temperature, but it will soften at a water temperature of 55-65°C to achieve the purpose of easily removing the support.
  • If your main purpose is to remove the support more easily and you don't care whether the PVA completely melts in the water, then this PVA is a better choice.

  • Tronxy PVA Filament Excellent Water Solubility Support 3D Printer Filament 1.75mm 0.5KG Spool for 3D Printers Clear Near Nature Tronxy 3D Printer | Tronxy Large 3D Printer | Tronxy Large Format Veho 600 800 1000 3D Printer
    Designed for dual extrusion 3D printers

    Tronxy PVA Filament Excellent Water Solubility Support 3D Printer Filament 1.75mm 0.5KG Spool for 3D Printers Clear Near Nature Tronxy 3D Printer | Tronxy Large 3D Printer | Tronxy Large Format Veho 600 800 1000 3D Printer
    Used to print support structures


    Q: Why is the support material needed in 3D printing?
    A: The support structure is a necessary auxiliary filament in 3D printing. You need them to print difficult overhangs and bridges in your model.

    Q: How to print water-soluble PVA filament along with other filaments?
    A: If you have a printer with two extruders, you can load one extruder with PLA to print the model and the other with a water-soluble material such as PVA or limonene-soluble material to print the support structure.

    Q: What are the pressure parameter settings of PVA filament water soluble?
    A: Printing temperature: 190-200°C (recommended temperature 200°C)
    Bed temperature: 55-65°C
    Fan speed: 100%
    Print speed: 20–40mm/s (recommended 30mm/s);
    Recommended Heated Build Platform: Structured Paper, PEI

    Q: Can the model printed with this water-soluble PVA filament be completely dissolvedin water?
    A: The support of the model can be softened at about 60° C and physically peeled off to remove the support. Please note that it has not completely dissolved in water.

    Q:What filament can be printed along with PVA filament?
    A: PVA water-soluble filament can be printed along with most filament on the market, such as PLA, PETG, TPU, etc.