Tronxy Carbon Fiber Filament PLA 1.75mm Reinforced 3D Printer PLA Filament Black PLA 3D Filament PLA-CF 1.75 Filament 1 KG Spool 2.2 LBS for 3D Printers
$49.99
| Quantity | Discount |
| 3 | 5% |
| 10 | 10% |
| 20 | 15% |
Estimated Delivery by
Tronxy Carbon Fiber Filament PLA 1.75mm Reinforced 3D Printer PLA Filament Black PLA 3D Filament PLA-CF 1.75 Filament 1 KG Spool 2.2 LBS for 3D Printers
About this Carbon Fiber PLA Filament:
【Product Material for Carbon Fiber Filaments】: Advanced carbon fiber printing filament containing 20% carbon fibre combined with PLA for greater strength and stiffness, toughness and abrasion resistance, 3D Printer Filament Strong & Easy to Print & Matte PLA-CF suitable for printing industrial products.【Product Features for Carbon Fiber PLA】: Good matt black pla finish with a frosted texture. No bubbles, no tangles, no clogging, minimal warpage, high toughness, good interlayer adhesion, easy to remove support.
【Tips for Carbon Fiber PLA Filament】: 1. The carbon fiber pla filament 1.75 has extremely high rigidity, and long-term printing will wear the copper nozzle and increase nozzle's aperture. Recommended to use stainless steel nozzles; 2. After using the filament, please put it in a sealed bag. Before next use it is recommended to use filament dryer to dry for 2 hours (drying temperature 50°) before printing to avoid stringing and help to print smoothly.
【Recommended Settings for Carbon Fiber PLA Filament】: 3d printer filament Strong 1kg. 1.75mm diameter +/- 0.05mm, to ensure consistent feeding and smooth printing. Recommended print temperature:190°C - 220°C. Recommended print speed:60mm/s. Hot bed temperature:60-65°C.
read more
Details
Higher Strength and Stiffness
Outstanding Print Quality
Carbon Fiber Matte PLA
High Compatibility with 3D Printer
Diameter 1.75mm is suitable for 99% of the printers on the market. No tangles, no clogging, minimal warpage, high toughness, good interlayer adhesiong maximum stiffness and strength.
Wide Application Range
Tronxy 1.75 PLA carbon fiber make your life colorful ,is ideal for innovations,prototypes and models,art and diy,fashionand design,homeand garden model,toy and games model.
1. The carbon fiber PLA filament has extremely high rigidity, and long-term printing will wear the copper nozzle and increase nozzle's aperture. Recommended to use stainless steel nozzles.
2. Our carbon fibre PLA is dried and vacuum-treated before leaving the factory, with a desiccant inside, so it can largely avoid moisture. Please feel free to use them. However, due to different climates and humidity levels in the air, if you get a carbon fibre filament that stringing, we recommend that you dry it in a filament dryer for 4 hours before printing to avoid stringing.
3. Ensure that the free end of the filament is inserted into the small hole at the edge to avoid tangling for the next use.
Carbon Fiber PLA Filament 1.75mm:
●Industrial Parts ●Prototypes and Models ●Bring Ideas to Life ●Containing 20% Carbon Fiber
Tronxy Carbon Fiber PLA Tension Test
Tronxy Carbon Fiber PLA Printing Screws
TRONXY Carbon Fiber Filament Characteristic
Higher Strength and Stiffness
Outstanding Print Quality
Carbon Fiber Matte PLA
Great Support Material
PLA CF is an ideal material for frames, supports, casings, propellers and tools
Suitable Industrial Supplies It is particularly loved by drone builders and and RC hobbyists.
Suitable Industrial Supplies It is particularly loved by drone builders and and RC hobbyists.
Automatic Winding System
Unintended parts that may not affect print performance
Low Warp and More Strength Dimensional accuracy, without support for minute overhangs and hollow areas
Low Warp and More Strength Dimensional accuracy, without support for minute overhangs and hollow areas
Matte Surface Finish
Carbon black appearance,good matt finish with a frosted texture
High Carbon Content Carbon fiber PLA contains 20% carbon element has extremely high rigidity
High Carbon Content Carbon fiber PLA contains 20% carbon element has extremely high rigidity
Carbon Fiber PLA 1.75mm Filament
●Stronger Toughness ●Solid State Printing ●Consistent Prints
High Compatibility with 3D Printer
Diameter 1.75mm is suitable for 99% of the printers on the market. No tangles, no clogging, minimal warpage, high toughness, good interlayer adhesiong maximum stiffness and strength.
Wide Application Range
Tronxy 1.75 PLA carbon fiber make your life colorful ,is ideal for innovations,prototypes and models,art and diy,fashionand design,homeand garden model,toy and games model.
Carbon Fiber Filament Recommended Print Setting
●Print Temperature: 190°C - 220°C ●Heat Bed Temperature: 60°C - 65°C ●Print Speed: 60mm/s ●Nozzle Size: ≥0.4mm
Tips for Carbon Fiber PLA Filament:
Tronxy Carbon Fiber Filament PLA 1.75mm Reinforced 3D Printer PLA Filament Black PLA 3D Filament PLA-CF 1.75 Filament 1 KG Spool 2.2 LBS for 3D Printers
$49.99
- Choosing a selection results in a full page refresh.
