Tronxy 320 Degree Hotend Direct Drive Extruder Print PP / PC High Temperature Upgrade Print Head for X5SA / X5SA 400 / X5SA 500 Series 3D Printers
| Buy Quantity | Get Discount |
| 3 | 5% |
| 10 | 10% |
| 20 | 15% |
Delivery
Tronxy All Metal Hotend Extruder High Temperature Version 320 Degrees Print Head Kits 0.4mm / 1.75mm Direct Drive Extruder
Product Details
320 Degree New and 275 Degree Ordinary: for X5SA / X5SA 400 / X5SA 500 Series
300 Degree Ceramic: for Moore Series
320 degree hotend direct drive extruder can print a wider range of material, ie: PP, PC, materials with metal components, etc.
275 degree hotend direct drive extruder can print soft materials, like TPU.
Note: After the high-temperature print head is installed, the firmware needs to be updated. Please provide the photo of printer's S/N which sticked on the side of the power supply, also the printer's ID, and we will send the corresponding firmware to update.
320 Degree Hotend Direct Drive Extruder
For X5SA Series / X5SA 400 Series / X5SA 500 Series
20 to 30 Adapter Board
Can upgrade current 275 Degree hotend to 320 degree hotend
Newly Upgraded Transparent
Materials Break Detector
Single Nozzle Extrusion
High Temperature Print Head: High-temperature type print head, the heating kit can be heated to 320°C high temperature when in use.
Ceramic High Temperature Print Head: Ceramic high temperature print head, the heating kit can be heated to 300°C high temperature when in use.
Heating kits will difference from those used with "High Temperature Print Head"
Ordinary High Temperature Print Head: Ordinary print head, the heating kit just can be heated to 275°C when in use.
If you have any questions, please feel free to contact customer service, thank you!
High Temperature Print Head Upgrade for:
Note: After the high-temperature print head is installed, the firmware needs to be updated. Please provide the photo of printer's S/N which sticked on the side of the power supply, also the printer's ID, and we will send the corresponding firmware to update.
320 Degree Hotend Direct Drive Extruder
High Temperature Printhead Upgrade Kit
For X5SA Series / X5SA 400 Series / X5SA 500 Series
20 PIN Cable
20 to 30 Adapter Board
New Version 320 Degree Hotend
Can upgrade current 275 Degree hotend to 320 degree hotend
Upgrade Advantage
The temperature of the print head is fully upgraded.
The temperature of the high-temperature print head can reach 320°C.
The ceramic print head can reach 300°C.
Ordinary just can reach 275°C.
Note: DO not touch it with your hands when it is heating up to prevent burns!!!
The temperature of the high-temperature print head can reach 320°C.
The ceramic print head can reach 300°C.
Ordinary just can reach 275°C.
Note: DO not touch it with your hands when it is heating up to prevent burns!!!
Print Header Details
High Temperature Print Head Type
Heating kits will difference from those used with "High Temperature Print Head"
Dual Fan Cooling
Double turbo fan, strong cooling capacity, rapid model forming.
Upgrade Notice !!!
The high temperature print head upgrade kit, when using it for the first time, the firmware must be updated to prevent unnecessary problems.If you have any questions, please feel free to contact customer service, thank you!
Tronxy 320 Degree Hotend Direct Drive Extruder Print PP / PC High Temperature Upgrade Print Head for X5SA / X5SA 400 / X5SA 500 Series 3D Printers
320 Degree New