Tronxy PVA Filament water soluble filament 3D printer filament 1.75mm filament support material 3D printing accessories environmental-friendly filament complex model printing
Water-soluble PVA filament needed to 3D print complex models and water-soluble support is easier to remove than regular support filament. If you have a printer with two extruders, you can load one extruder with PLA for printing models and another with PVA for printing support structures.
You need PVA to print difficult overhangs and bridges in your model. After printing, the model is immersed in 55-65℃ warm water for softening, and after layering, the PVA support structure is peeled off by hand and washed off. It reduces the risk of model damage and makes post-processing easier.
Instructions for use
Ideal for Supporting Complex Structural Models
1. The recommended printing temperature is 200°C; Bed temperature: 60°C; Due to the characteristics of the filament itself, if the setting temperature exceeds the recommended range of 200°C, it is easy to cause plugging.
2. Fan speed: 100%; Print speed: 20–40mm/s (recommended 30mm/s).
3. It is recommended to use about 55°C - 65°C warm water to loosen the PVA supports faster. The higher the temperature, the faster the PVA dissolves and falls.
Good choice for support filament
Not Dissolved in water, But softened and layered.
1. Thanks to its softening in water, it makes possible to print complex models and mobile constructions that no longer need to be assembled from individual parts.
2. After the PVA layeres and softens, it is very easy to peel off the model by hand.
Remove the support more easily
Attention Please
This filament is optimized PVA, which avoids the problems of easy breakage, severe moisture, and difficult storage caused by PVA being too soluble in water.
Therefore, this PVA filament is insoluble in water at room temperature, but it will soften at a water temperature of 55-65°C to achieve the purpose of easily removing the support.
If your main purpose is to remove the support more easily and you don't care whether the PVA completely melts in the water, then this PVA is a better choice.
Designed for dual extrusion 3D printers
Used to print support structures
