Newly Upgraded Klipper
High Speed 300mm/s Fast Printing
VEHO 600 PRO V3 Print Area 600*600*600mm Klipper Firmware
● Can be paired with 1KG/3KG/5KG filaments ● 7 sets of linear guides (4Z+2Y+1X) ● 7-inch high-definition capacitive screen
UNLIMITED CREATIVITY
● Klipper System ● 7 High-Precision Linear Guides ● 7-inch HD Capacitive Touchscreen ● Four Sets Of Independent Z-axis Ball Screws ● Dual End Control ● WIFI Connection ● Mortise and Tenon Structure Machine Frame ● High Speed Printing ● Built in Lighting Strip ● Direct Drive Extruder ● Ceramic Preheating ● Preheat The Hot Bed Evenly
Core Advantages of the Klipper System
Klipper's fundamental strength lies in its "high-performance host computing + lightweight execution" architecture. This design breaks through the processing constraints of traditional firmware, delivering.
● Higher Printing Speeds
● Superior Surface Finish Quality
● Enhanced Functional Extensibility
Corexy Printing Structure
The lightweight print head combined with Corexy structure is more conducive to high-speed operation, The maximum printing speed is 300mm/s and the acceleration is 10000mm/s².
Magnetic Auto-Leveling System
Touch-triggered magnetic snap-back, Simplified Workflow, 3-Step Leveling Operation.
● Smart Rebound Leveling
● Streamlined Workflow
"Bed Mesh" 36 Detection Points
The Bed Mesh function allows users to use the printer without considering the issue of the first layer of the model not sticking due to slight tilting or unevenness of the platform. The system will automatically detect the gap data of 36 detection points on the platform and perform position compensation during printing.
32mm²/s High Flow Rate
The nozzle is made of titanium alloy and copper, with a flow rate of up to 32mm²/s. It is equipped with a 360 degree surround ceramic plate for rapid heating, ensuring sufficient melting of consumables while printing at high speed.
● Maximum Flow Rate 32mm²/s
● Maximum Temperature 320°C
● Titanium Alloy + Copper Nozzle
7 High Precision Linear Guides (4z + 2Y + 1x)
The XYZ axis adopts high-speed linear guide rails, which have lower friction and wear compared to traditional methods, making it more conducive to the smooth and high-speed operation of the machine.
● Low Friction Force
● High Wear Resistance
● High Precision
Lightweight Print Head
The extruder adopts an all metal mini extruder, which is lightweight and smooth for extrusion, Lightweight design is more conducive to high-speed movement.
4 Independent Motor Compensation System
Comes With Built-in Lighting
Equipped with LED lighting strips and all-round supplementary lighting, printing details can be clearly observed even in dim environments.
Automatic Adjustment Of XY Axis Belt
XY belt adopts spring mechanical thrust, which can automatically adjust the belt slack.
Hot Bed Preheating Is Fast And Uniform
The preheating of the ho tbed adopts Ac, with short heating time and uniform heating of each part. Tempered glass platform, smoother and smoother, easier to print.
Configure Four Ball Screws
The ball screw transmission system is a point contact rolling motion, with low frictional resistance, high sensitivity, no vibration during start-up, and no crawling phenomenon at low speeds. Therefore, it can precisely control micro feed.
● 5 x High Precision
● Smooth And Fluent
● Accurate Independent Control
Built in 2.381mm Steel Ball For Precise Control Ball Screw Model: SFU1204-3
Not Afraid of High Speed Vibration
The machine frame adopts a mortise and tenon structure, which has higher machine stability.
Filament Run-out Detector
● Detected depletion or disconnection of filament, printer stops detecting ● Reload filament and continue printing
Adjustable Pulley Foot Pad
● Raise the foot mat to easily move the machine ● Lower the foot mat, the machine cannot be moved
Specifications
Printing principle: FDM
Print Size: 600*600*600mm
Printer Size: 847*847*970mmmm
Movement Speed: 300mm/s
Acceleration: 10000/s²
Layer Thickness: 0.2-0.4mm
Print Principle: FDM (Fused Deposition Molding)
Nozzle Size: Standard 0.4mm
Positioning Accuracy: X/Y:S0.01875mm Z:S0.00375mm
Input File Type: STL\OBJ\DAE\AMF\STEP
Slicing Software: Orca Slicer (Support Third-Party Slicing Software)
Connection Method: LAN connection, WIFI, USB, and TF Card
Power Supply: 24V/240W 50/60HZ
Filaments Support: PLA, TPU, ABS, Wood, PC, HIPS, Wooden filament etc.
Nozzle Temp 300℃ (MAX)
Machine Material: Aluminum profile & sheet metal
Heat Bed Temp: 100°C
Operating System: Windows / MAC OS
Firmware: KLIPPER
