Tronxy 3D Printing Magnetic Sticker with Steel Plate + TR Auto Leveling Sensor 3D Printer Parts Kits

$35.99
Delivery

Size: 220x220mmx1 pcs+TR Sensor

220x220mmx1 pcs+TR Sensor
220x220mmx1 pcs+TR Sensor
220x220mmx2 pcs+TR Sensor
220x220mmx3 pcs+TR Sensor
255x255mmx1 pcs+TR Sensor
255x255mmx2 pcs+TR Sensor
255x255mmx3 pcs+TR Sensor
310x310mmx1 pcs+TR Sensor
310x310mmx2 pcs+TR Sensor
310x310mmx3 pcs+TR Sensor
330x330mmx1 pcs+TR Sensor
330x330mmx2 pcs+TR Sensor
330x330mmx3 pcs+TR Sensor
400x400mmx1 pcs+TR Sensor
400x400mmx2 pcs+TR Sensor
400x400mmx3 pcs+TR Sensor

Product Details

Tronxy 3D Printing Magnetic Sticker with Steel Plate + TR Auto Leveling Sensor 3D Printer Parts Kits

3D Printer Flex Spring Steel Sheet Applied Magnetic Hot Bed Tape Sticker Surface Flex Plate

Package Included:
Spring steel sheet applied + Magnetic Base

Advtanges:
Never warp & Never rust.
Easy to get the first layer even for a new user.
Flexible, Removable, stick to magnets very well.
Suits variety of filaments, especially for PLA and ABS.
Free clean- just flex the plate a little then take the prints off after cooled.
Fast heater performance, less waiting time after printing.
A lifetime 3D printer bed.
The magnetic base can stand the high temp at 140C without losing magnetism, suitable for almost all filaments. PLA, ABS, PC, etc.

Material:
This spring steel sheet is flat, flexible, stainless stick to magnets very well. 0.5mm or 0.4mm thickness

Available size:
220x220mm, 310x310mm, 330x330mm, 400x400mm
If you want to buy other size, feel free to send us a message, we will let you know how we can help you out.

1. Recommend print temps
PLA – 60C
HTPLA – 60C
PETG – 70-80C
PCTG – 70-80C
ABS – 100C

2. Product Usage Guidelines
PETG/PCTG/TPU– If you are not careful with your 1st layer you can risk bonding the PETG/PCTG/TPU to the surface. This will damage the surface. To prevent damage to the surface apply hairspray or PVA gluestick before printing PETG/PCTG/TPU
Part Removal– Make sure your plate is at close to room temp (under 30C) before removing parts. If you remove when hot it more likely to damage the surface.

How to use?
After apply on our special spring stainless steel sheet, You can simply use 4 clips or magnets to hold it on the heatbed, then enjoy the printing.
Easily remove 3D prints on printer by removing the spring steel plate, flexing it, and popping the print off. It's simple and makes the print removal process much easier.
For details, Check the guide video on Youtube.

Aftersales:
If any quality problem, free returning.
Or send a message, we will reply you within 12 hours.

Tronxy 3D Printing Magnetic Sticker with Steel Plate + TR Auto Leveling Sensor 3D Printer Parts Kits
Tronxy 3D Printing Magnetic Sticker with Steel Plate + TR Auto Leveling Sensor 3D Printer Parts Kits
Tronxy 3D Printing Magnetic Sticker with Steel Plate + TR Auto Leveling Sensor 3D Printer Parts Kits
Tronxy 3D Printing Magnetic Sticker with Steel Plate + TR Auto Leveling Sensor 3D Printer Parts Kits
Tronxy 3D Printing Magnetic Sticker with Steel Plate + TR Auto Leveling Sensor 3D Printer Parts Kits
Tronxy 3D Printing Magnetic Sticker with Steel Plate + TR Auto Leveling Sensor 3D Printer Parts Kits
Tronxy 3D Printing Magnetic Sticker with Steel Plate + TR Auto Leveling Sensor 3D Printer Parts Kits