Tronxy 3D Printer Double Sided Textured Removal Spring Steel PEI Sheet Build Plate Magnetic Base Hot Bed Sticker 800mmx800mm
$372.99
Consegna stimata entro il
Package Size: 890mm*880mm*45mm
Package Weight: 6.6kg
Dettagli del prodotto
Strong adhesion
Easy to install and clean
Good flatness of printed surface
High temperature resistance and durable
1. Tear off the glue behind the magnet base and stick it on the hot bed platform. Be careful to paste it flat and don't leave any bubbles in it.
2. Just place the PEI spring steel plate on the magnet base. Please proceed with bed leveling before 3D printing.
3. Start printing. You can set the hot bed temperature 40-80 °C according to the actual situation (Please do not exceed 80 °C).
4.Take off the PEI spring steel plate and bend it gently. Then you can remove the printed model by hand easily.
PEI spring steel plate
With 0.4MM thickness and solidifed to form a high molecular weight cross-linked structure. Spring steel is a kind of steel specially used in the manufacture of springs and elastic elements. It has the ability of elastic deformation, so it is difcult for manpower to deform it permanently.
Magnetic base
Magnetic rubber, soft texture, and good magnetic and temperature resistance. With adhesive at the back side, it can be affixed to the hot bed platform.
Hot bed
Tronxy 3D Printer Double Sided Textured Removal Spring Steel PEI Sheet Build Plate Magnetic Base Hot Bed Sticker 800mm Full sizes for full series
The high temperature resistant magnetic rubber sheet can withstand high temperatures up to 130 degrees for a long time without blistering and strong magnetism.
PEI Magnetic Sticker
Newly upgraded flexible steel plate with textured double PEI surface, smooth and easy to take model.
Easy Use
1. Tear off the glue behind the magnet base and stick it on the hot bed platform. Be careful to paste it flat and don't leave any bubbles in it.
2. Just place the PEI spring steel plate on the magnet base. Please proceed with bed leveling before 3D printing.
3. Start printing. You can set the hot bed temperature 40-80 °C according to the actual situation (Please do not exceed 80 °C).
4.Take off the PEI spring steel plate and bend it gently. Then you can remove the printed model by hand easily.
PEI Spring Plate Platform With Magnetic
The PEI coating has stronger adhesion, and the flexible panel is easier to remove the model.
With 0.4MM thickness and solidifed to form a high molecular weight cross-linked structure. Spring steel is a kind of steel specially used in the manufacture of springs and elastic elements. It has the ability of elastic deformation, so it is difcult for manpower to deform it permanently.
Magnetic rubber, soft texture, and good magnetic and temperature resistance. With adhesive at the back side, it can be affixed to the hot bed platform.
Tronxy 3D Printer Double Sided Textured Removal Spring Steel PEI Sheet Build Plate Magnetic Base Hot Bed Sticker 800mmx800mm
$372.99
